Description
Dr. Fixit PidiGrout 10M: High-Strength, Non-Shrink Precision Grout
Dr. Fixit PidiGrout 10M is a high-performance, non-shrink, cementitious grout designed for precision grouting in demanding industrial and civil construction projects. Formulated with a blend of portland cement, graded fillers, and specialized chemical additives, it offers dual-stage expansion (both in plastic and hardened states) to ensure a permanent, void-free bond.
Whether you are anchoring heavy machinery or structural steel, PidiGrout 10M provides the high early and ultimate strength required to handle extreme static and dynamic loads.
Key Features & Benefits
Dual Expansion System: Compensates for shrinkage in both the plastic and hardened stages, ensuring 100% surface contact and load transfer.
High Early Strength: Achieves significant compressive strength within 24 hours, allowing for faster bolt tightening and machinery commissioning.
Superior Flowability: Its free-flowing, self-leveling properties allow it to fill gaps and intricate voids without the need for vibration or mechanical compaction.
Chloride-Free: Non-corrosive formulation ensures the long-term safety of reinforcement steel and anchor bolts.
High Ultimate Strength: Provides a dense, low-permeability grout that is resistant to water, oil, and grease.
Adjustable Consistency: Can be mixed to a fluid or flowable consistency by simply adjusting the water-to-powder ratio.
Common Applications
Dr. Fixit PidiGrout 10M is the trusted choice for:
Heavy Machinery Foundations: Grouting for turbines, compressors, and generators.
Structural Steelwork: Bedding for stanchion base plates and steel columns.
Bridge Bearings: Providing a solid support interface for bridge girder pads.
Pre-cast Concrete: Filling joints and gaps in pre-cast panels and columns.
Anchor Bolting: Securing foundation bolts, starter bars, and heavy-duty fixings.
Pro-Tip for Best Results
Surface Preparation: Ensure the concrete substrate is mechanically roughened and saturated with water for at least 2 hours prior to grouting. This prevents the substrate from sucking water out of the grout, ensuring optimal hydration and strength.
Are you planning to use this for a heavy industrial project?
Would you like me to provide the mixing ratios and water requirements for achieving different consistencies (Fluid vs. Flowable) with PidiGrout 10M?
