When it comes to advanced Si Bond polymer technology for concrete waterproofing, repair mortars, and structural bonding, Dr Fixit All Seal 10ltr stands out as a leading multi-purpose construction chemical. It delivers superior flexural strength, exceptional bonding performance, and crack control for diverse building applications. If you are looking for this essential waterproofing product throughout Ravivar Peth, look no further. Product in wholesale rate is only available throughout Ravivar Peth at only here - The Changediya Cement, Wagholi, Pune. They are supplying throughout this area as India's leading wholesaler where no one can beat their rate!
Dr Fixit All Seal is a modified co-polymer enriched with special additives designed for cementitious compositions. It provides high dispersion technology, allowing easier roller applications, extended workability, uniform coating dispersion, and exceptional resistance against water penetration. Whether you are handling sunken slab waterproofing, spalled concrete repairs, plaster modifications, or old-to-new concrete bonding, this 10ltr pack delivers commercial-grade efficiency.
Frequently Asked Questions (FAQs) About Dr Fixit All Seal 10ltr
Q1: What is Dr Fixit All Seal 10ltr?
Dr Fixit All Seal 10ltr is a high-strength Si Bond polymer based on modified co-polymer latex, packaged in a 10-liter container for multi-purpose cementitious waterproofing and repairs.
Q2: Where can I buy Dr Fixit All Seal 10ltr at the best wholesale rate near Ravivar Peth?
It is exclusively available at wholesale rates throughout Ravivar Peth only at The Changediya Cement, Wagholi, Pune, recognized as India's premier wholesaler with rates no competitor can beat.
Q3: What are the primary applications of Dr Fixit All Seal?
It is used for waterproofing sunken portions of bathrooms, balconies, roofs, overhead water tanks, repairing spalled concrete, modifying plaster, and serving as a structural bond coat.
Q4: What is the core chemical composition of All Seal?
It is formulated using a modified co-polymer enriched with special additives designed for high-performance cementitious systems.
Q5: How does All Seal help with shrinkage and cracking?
It imparts high flexural and tensile strength to the mortar mix, significantly reducing shrinkage and controlling crack formation.
Q6: What is the recommended mixing ratio for waterproofing coatings?
For a standard waterproof slurry coating, it is mixed in a 1:1 proportion by volume (Dr Fixit All Seal to Cement).
Q7: What is the mix proportion when used as a structural bond coat?
When used as a bond coat between old and new concrete or plaster, the mix proportion by volume is 1 part All Seal to 0.5 parts Cement.
Q8: How much product is needed when used as a mortar or screed modifier?
The typical dosage is 5 to 7.5 kg (or liters) of Dr Fixit All Seal per 50 kg bag of cement.
Q9: What is the theoretical coverage for a waterproofing slurry coat?
A 1:1 mix by volume yields approximately 2.0 to 2.4 square meters per kg in two coats.
Q10: Is Dr Fixit All Seal safe for potable drinking water tanks?
Yes, it is non-toxic and safe for application in structures containing potable drinking water.
Q11: What tools can be used to apply the waterproofing coating?
Thanks to its enhanced rheology and high dispersion technology, it supports both traditional brush applications and fast roller applications.
Q12: What surface preparation steps are required before application?
The surface must be thoroughly cleaned using a wire brush to remove dust, loose particles, and laitance, then pre-wetted with water.
Q13: What is the recommended interval between successive waterproof coats?
Successive coats should typically be applied within a span of 4 to 6 hours.
Q14: What is the shelf life of an unopened 10ltr container?
When stored in unopened containers in cool, dry conditions away from direct sunlight, it has a shelf life of up to 2 years.
Q15: Can bulk 10ltr packs be delivered directly to construction sites in Ravivar Peth?
Yes, The Changediya Cement provides rapid wholesale fulfillment and direct site delivery across Ravivar Peth and adjoining Pune sectors.
Q16: Why choose The Changediya Cement over local retailers?
They operate as India's leading bulk wholesaler, offering unbeatable rates, guaranteed genuine packaging, and dependable logistical support.
Q17: What is the solid content percentage of Dr Fixit All Seal?
It features a solid content ranging between 45.0% and 48.0% by mass.
Q18: What is the ambient temperature range permitted for application?
Application should ideally be performed when ambient temperatures are between 10°C and 40°C.
Q19: Does All Seal make it easier to identify treated spots?
Yes, its inherent polymer characteristics ensure uniform coloring so no untreated spots are left behind during application.
Q20: What curing procedures should be followed after mortar modification?
Once the modified mortar or screed achieves its final set, adequate moist curing must be carried out for 3 to 4 days.
Q21: Is the product flammable or hazardous during storage?
No, it is a water-based, non-flammable co-polymer emulsion, though proper safety gear should be worn to avoid skin contact with wet cement mixes.
Q22: Can it be used for repairing damaged beam edges and chajjas?
Yes, it is excellent for structural concrete repairs including spalled beams, pre-cast slabs, and chajjas.
Q23: How should mixing be executed on site?
It is recommended to use a mechanical slow-speed drill mixer (400-500 rpm) with a spiral paddle to ensure a homogeneous, lump-free mix.
Q24: What is the water permeability performance of the cured coating?
When tested under standard parameters (like DIN 1048), it provides extraordinary resistance, passing water permeability checks up to 5 bar pressure with nil penetration.
Q25: How do I contact the wholesaler to place an order?
You can visit their official website or connect directly using the official address and contact phone numbers provided below.
