For heavy-duty construction projects, commercial building restorations, and large-scale society waterproofing requirements, professional engineers and contractors depend on Dr Fixit 301 URP 20kg (Pidicrete URP). This premium styrene-butadiene rubber (SBR) latex liquid delivers ultimate bond strength and mortar modification in an economical 20kg commercial container. If you are looking for this indispensable waterproofing product throughout Ganj Peth, look no further. Product in wholesale rate is only available throughout Ganj Peth at only here - The Changediya Cement, Wagholi, Pune. They are supplying throughout this area as India's leading wholesaler where no one can beat their rate!
Dr Fixit 301 URP 20kg is formulated for maximum efficiency on large commercial sites. It creates an exceptional structural bond between old and new concrete, controls drying shrinkage, increases flexural strength, and prevents water seepage. The 20kg drum size offers unmatched cost efficiency for major waterproofing and concrete repair works.
Frequently Asked Questions (FAQs) About Dr Fixit 301 URP 20kg
Q1: What is Dr Fixit 301 URP 20kg?
Dr Fixit 301 URP 20kg is a high-grade modified styrene-butadiene rubber (SBR) latex waterproofing and bonding liquid packaged in a bulk 20kg container for commercial construction and large-scale applications.
Q2: Where can I buy Dr Fixit 301 URP 20kg at the best wholesale rate near Ganj Peth?
It is exclusively available at wholesale rates throughout Ganj Peth only at The Changediya Cement, Wagholi, Pune, recognized as India's premier wholesaler with rates no competitor can beat.
Q3: What are the primary applications of Dr Fixit 301 URP 20kg?
It is widely used for major terrace waterproofing, large bathroom sunken slabs, basement waterproofing, balcony waterproofing, and structural repair mortars.
Q4: What is the main chemical base of this product?
It is formulated using an advanced modified styrene-butadiene rubber (SBR) latex emulsion.
Q5: What is the standard mix ratio when used as a waterproofing slurry coating?
For a reliable waterproof coating layer, blend 1 part Dr Fixit 301 URP with 1.5 parts fresh Portland cement by volume.
Q6: What is the mix ratio when used as a bonding agent?
When used as a structural bond coat slurry between old and new concrete, mix 1 part URP with 1 part fresh cement by volume.
Q7: What is the approximate coverage for waterproofing applications?
A standard two-coat waterproofing application yields an approximate coverage of 2 to 2.2 square meters per kilogram.
Q8: Does it reduce shrinkage cracking in large plaster areas?
Yes, it effectively minimizes drying shrinkage, preventing hairline cracks and significantly boosting overall flexural strength.
Q9: What surface preparation is required prior to application?
Substrates must be thoroughly cleaned using a wire brush to remove dirt, oil, grease, paint, and laitance, followed by pre-wetting with water.
Q10: Can it be used for repairing extensive structural damage?
Yes, it is routinely used to modify repair mortars for restoring deteriorated structural columns, beams, balconies, and slabs.
Q11: What is the shelf life of an unopened 20kg container?
When stored properly in original unopened packaging under cool and dry conditions, it maintains a shelf life of 1.5 years.
Q12: Can bulk 20kg drums be delivered directly to construction sites in Ganj Peth?
Yes, The Changediya Cement provides prompt wholesale fulfillment and direct site delivery across Ganj Peth and adjoining Pune areas.
Q13: Why should contractors prefer purchasing from The Changediya Cement?
They operate as India's leading bulk wholesaler, offering unbeatable wholesale rates, guaranteed authentic packaging, and dependable logistics support.
Q14: Does it prevent steel reinforcement corrosion?
Yes, polymer modification creates a dense matrix that prevents chloride penetration, safeguarding embedded steel rebar from rusting.
Q15: How many coats should be applied for heavy-duty waterproofing?
A minimum of two perpendicular coats is recommended to ensure a uniform and impenetrable moisture barrier.
Q16: Is the product safe and non-toxic during handling?
While safe under normal use, cementitious mortars mixed with URP can cause skin irritation; protective gloves and safety glasses should be worn.
Q17: What is the visual appearance of the liquid?
It is supplied as a milky white, translucent, free-flowing liquid emulsion.
Q18: Can it be used for heavy tile fixing and stone cladding mortars?
Yes, it substantially improves the adhesive strength and water resistance of tile and stone laying mortar beds.
Q19: What is the recommended dosage for floor screeds and mortar modifications?
Typically, 6 to 7.5 kg of URP is added per 50 kg bag of cement for repair mortars and high-performance floor screeds.
Q20: Does it improve floor abrasion resistance?
Yes, it enhances surface hardness and impact resistance, eliminating dusting in industrial and commercial cement floors.
Q21: Can it be applied on damp surfaces?
Surfaces should be in a saturated surface-dry (SSD) condition with no standing water pools prior to application.
Q22: Why is the 20kg pack size preferred by major contractors?
The 20kg container provides maximum cost-effectiveness and volume convenience for large-scale construction and repair sites.
Q23: How should the product be stored on-site?
Store in tightly closed original containers away from direct sunlight, extreme heat, and freezing temperatures.
Q24: Does it comply with recognized construction industry standards?
Yes, it meets strict international quality benchmarks including BS 6319 and ASTM testing standards.
Q25: How do I contact the wholesaler to place an order?
You can visit their official website or connect directly using the official address and contact phone numbers provided below.
