Pune
08048047439
+919055079555

Dr. Fixit PIDIPROOF LW+ 101 (50 Litre) at Changediya Cement, WagholiProduct OverviewSupercharge your...

Dr. Fixit PIDIPROOF LW+ 101 (50 Litre) at Changediya Cement, Wagholi

Product Overview

Supercharge your large-scale construction, high-rise masonry, and commercial infrastructure projects with the industrial Dr. Fixit PIDIPROOF LW+ 101 (50 Litre) drum, available at Changediya Cement, Wagholi. This massive 50-litre bulk barrel is tailored specifically for real estate developers, infrastructure contractors, and major building firms aiming to maximize cost savings while ensuring comprehensive structural protection.

As an advanced integral liquid waterproofing admixture, Dr. Fixit LW+ 101 modifies the concrete and plaster mixtures dynamically during the initial batching stage. By filling internal micro-pores and capillary networks, it builds a lasting, absolute shield against moisture ingress, structural cracks, and rainwater damage from the inside out.

For Industrial Booking & Direct Truckload Site Deliveries, Call: +91 9055079555


Technical Features & Specifications

  • Pack Size: 50 Litre industrial drum/carboy (Best volumetric value for high-volume batching)

  • Form: Free-flowing, easily dispersible wine-red liquid modifier

  • Standard Dosage: 200 ml per 50 kg bag of cement (One 50 Litre drum can efficiently treat up to 250 bags of cement)

  • Composition: Formulated with active surface plasticizing agents, specialized water-reducing polymers, and anti-segregation additives

  • Primary Application Areas: Mass RCC slab casting, large basement raft foundations, multi-story building external plastering, large retaining walls, public water storage tanks, and large-scale industrial floor screeds

Key Benefits of the 50 Litre Dr. Fixit LW+ 101 Bulk Pack

  • Maximum Bulk Financial Economy: Purchasing the 50 Litre commercial drum offers the lowest per-litre cost compared to smaller retail buckets, helping you reduce overall raw material overheads on massive construction sites.
  • Ultimate Internal Permeability Reduction: Completely alters the concrete matrix to block the transmission of moisture, shielding vast ceiling slabs and external structures from dampness, efflorescence (white salt patches), and peeling paint.
  • Enhanced Workability with M-Sand: Drastically improves the flow, cohesion, and pumpability of site-mixed concrete or mortar when using Manufactured Sand (M-Sand) or River Sand. It prevents bleeding and aggregate separation, resulting in flawlessly compacted structures.
  • Eliminates Massive Shrinkage Cracks: Safely lowers the required water-cement design ratio without compromising workability. This structural refinement stops hairline shrinkage cracks across expansive wall plasters and broad roof slabs.
  • Reinforced Rebar Protection: Restricts structural carbonation and moisture migration down to the internal steel rebars, eliminating premature internal rust expansion and subsequent concrete spalling.
  • Unyielding Compressive Strength: Blends into heavy structural mixes seamlessly without altering the specified concrete setting time or compromising structural load capacity.

Efficient Industrial Site Mixing Steps

To achieve maximum waterproofing uniformity across large concrete volumes, enforce this method:

  1. Dry Batching: Load measured cement, aggregates, and sand into your structural concrete mixer drum. Run in a dry state for 1 to 2 minutes.

  2. Initial Hydration: Pour roughly 75% to 80% of the total mixing design water into the running drum and mix for 2 to 3 minutes.

  3. Chemical Introduction: Measure out the exact amount of Dr. Fixit LW+ 101 required (200 ml per 50 kg cement bag). Pour the chemical into the remaining 20% of batch water, stir it well, and discharge it directly into the wet concrete mixer. Run for 2 extra minutes for complete dispersion.
  4. Placement: Pour your modified concrete mix or apply the modified plaster without delay, and carry out standard water curing practices.
Precautions: Never pour Dr. Fixit LW+ 101 directly onto completely dry cement or aggregate materials before adding water.


Why Source 50 Litre Drums from Changediya Cement, Wagholi?

Strategically located on the Ahmednagar Highway in Wagholi, Pune, Changediya Cement handles complex project procurement, bulk transport logistics, and site timelines effortlessly.

  • Fresh Industrial Inventories: We supply 100% genuine Pidilite products sourced directly from fresh factory batches, ensuring your site gets optimal chemical shelf-life.

  • Competitive Tiered Pricing: Benefit from top-tier wholesale pricing options on volume orders of 50 Litre commercial drums.

  • All-In-One Structural Supply: Pick up your high-grade structural cement, concrete pyramid cover blocks, waterproofing chemicals, and structural supplies in one coordinated pickup.

  • Direct-to-Site Transit: Dedicated transport vehicles drop off heavy 50 Litre drums safely straight to your job site locations across Wagholi, Kharadi, Kesnand, Bakori, Lohegaon, and greater Pune.

Get Pricing & Availability Instantly!

Need a specialized commercial quotation or immediate dispatch coordinates for your project site? Contact our material logistics desk or visit our main commercial yard today.

  • Store Address: Changediya Cement, Nagar Road, Wagholi, Pune 412207

  • Contact Number: 9055079555 (Call or WhatsApp for immediate commercial pricing)

#DrFixitLWPlus #DrFixit50Litre #BulkWaterproofing #ChangediyaCement #WagholiConstruction #IntegralWaterproofing #ConcreteAdmixture #PlasterWaterproofing #PuneBuilders #ConstructionChemicals #HomeConstructionPune #CivilEngineeringPune #WagholiBusiness

 2026-05-24T00:00:01

Keywords